Nail gun bullet are non-military bullets that contain gunpowder and are very lethal. They can be easily converted into gun bullets. Cartridge powder loads are widely popular in the decoration industry. Although it is a dangerous tool with limited use, it is widely used in daily life and is an easily available bullet.
Nail gun cartridge basic information
The main ingredients of nail bullet: nitrocellulose, stabilizers, solvents, and chemical pigments.
Types of Cartridge Nail Guns
S1 bullet 6.8X11, dose 82.28;
S5 bullet 5.6X16, dose 89.6. The difference is 7.32. The dosage of the two is not much different, but the color factor is different, from black, red, yellow, blue, in order of decreasing power.
Things to note when using a nail gun
1.Personnel who use a cartridge should correctly select the model and color of the gun nail cartridge, and operate according to the instructions for the drive pins, nail gun bullets, and nail guns.
2.Avoid direct baking or heating of nail gun bullets with high-temperature objects, such as hot steel ingots, hot steel ingot molds, furnaces, etc., at close range. It is strictly prohibited to place nail gun bullets or nail guns on hot steel ingots, hot steel ingot molds, furnaces and other high-temperature objects.
3.Do not give cartridge to unrelated persons or children. Nail gun cartridges should be stored properly when not in use.
4.Do not hit the nail gun bullets at will, and do not rub the nail gun bullets with nails or other hard objects.
5.When the nail gun is not in use, do not loosen the safety at will; when the concrete gun fails, first remove the bullet from the nail gun and then repair it.
6.If the nail gun blank does not fire when shooting, please wait 5 seconds before moving the nail gun.
Application scenarios of nail guns
The nail gun bullet needs to be used in conjunction with the nail gun machine. Its working principle is that when the nail gun fires the nail gun bullet, it uses the gas generated during the launch as power to shoot the nails into the interior of the building. Therefore, it is mainly used in installation, construction, metallurgy, shipbuilding and other industries.
Post time: Aug-26-2024
